The MILAN MTA GRANITE tactile guiding strip is made of methacrylate resin with 0.6/1.6 aggregates (corundum, marble, silica). It can be glued or self-adhesive. For exterior use only.

• Excellent non-slip performance due to the mineral granules. SRT pendulum test = 0.76, superior to the French NF P98-351 standard. AFPV friction coefficient: 0.54 (CEPV N°ONAG 09.096 of the group GINGER CEBTP)
• Great traffic resistance
• Superior durability
• Low dirt accumulation
• Excellent UV and weather resistance
• Flexibility
• 4 colours : white, black, grey, cream
• Dyed in the mass. Coulour and dimensional stability.
• Complies with the NF P98-352 French standard

Strengths of the self-adhesive system:

• Quick and easy to install
• No drying time
• Rapid trafficability
• Versatility of substrates (asphalt, concrete, granite...)
• No special tools required
• Bad odourless
• No waste

Our tactile guiding strips are available in 2 different widths: 17 cm (3 ribs) or 22 cm (4 ribs)
 

The MILAN MTA tactile guiding strip is made of methacrylate resin. It can be glued or self-adhesive. For exterior use only.

• Excellent non-slip performance due to the mineral granules. SRT pendulum test = 0.63, superior to the French NF P98-351 standard.
• Great traffic resistance
• Superior durability
• Low dirt accumulation
• Excellent UV and weather resistance
• Flexibility
• 5 colours : white, black, grey (RAL 7040), yellow (RAL 1023), cream (RAL 1015)
• Dyed in the mass. Coulour and dimensional stability.
• Complies with the NF P98-352 French standard

Strengths of the self-adhesive system:

• Quick and easy to install
• No drying time
• Rapid trafficability
• Versatility of substrates (asphalt, concrete, granite...)
• No special tools required
• Bad odourless
• No waste

Our tactile guiding strips are available in 2 different widths: 17 cm (3 ribs) or 22 cm (4 ribs).

Self-adhesive tactile guiding surface made of polyurethanne resin. It can be used in an interior or exterior environment.

MILAN EXCEL has ultra-resistant adhesive system which allows a definitive application of the band. It can be applied quickly on various substrates with a rapid return to service.

• High non-slip performance. SRT pendulum test = 0.52, superior to the French NF P98-351 standard
• Resistance of adhesive system
• Excellent UV and weather resistance
• Great flexibility
• Available in 6 colours: white, black, yellow (RAL 1023), grey (RAL 7040), dark grey (RAL 7015), cream (RAL 1015)
• Dyed in the mass. Coulour and dimensional stability
• Low dirt accumulation
• Complies with the NF P98-351 French standard
• Fire resistance: Cfl-S1 (EN 13501-1 French standard)

Use: 

• Can be applied indoor or outdoor (good consistency throughout the same establisment)
• Adhesive fixing: quick and easy to apply
• No drying time
• Rapid trafficability
• Versatility of substrates (asphalt, concrete, granite, tiles...)
• Can be applied by only one person
• No special tools required
• Bad odourless
• No waste

Aluminum flat sheet + methacrylate resin sprinkled with marble aggregates.
- High mechanical strength
- High resistance to corrosion
- High anti-slip performance
- Ease of installation and maintenance
- Pre-drilled profile with insert.

With its width of 3 cm, the flat profile GECKO ALU XP can be used as a guidind rail to help visually impaired people to orient themselves in space.

Thermoplastic tactile guiding strips is tainted in the mass. For exterior only.

PERFORMANCE : Preserves its whiteness in time / not yellowing Non-Harmful Product Great flexibility

USE : Ease of installation, without glue, scoth, only a gas burner. No complementary product needed. Suitable for beginners. Quick set up, very fast recirculation.

Adviced : Use an infra-red thermometer to control the melting temperature (min 200°C).

Thermoplastic tactile guiding strips is tainted in the mass. For exterior only. 

PERFORMANCE :

• Preserves its whiteness in time / not yellowing
• Non-Harmful Product
• Great flexibility

USE :

• Ease of installation, without glue, scoth, only a gas burner. 
• No complementary product needed. Suitable for beginners.
• Quick set up, very fast recirculation.
• Adviced : Use an infra-red thermometer to control the melting temperature (min 200°C).

Self-adhesive PU guiding rail
Polyurethane resin
Self-adhesive
Cfl-s1 fire classification
High flexibility
Easy to apply

PU guiding strip
Striped model made of polyurethane resin
Self adhesive
M2 fire classification
High flexibility
Easy to apply