Steel tactile stud

TAC stud 25 mm to fix - Black or white steel

Réf. : SEC0376/SEC0377
Example of black tactile steel nails at the top of the stairs Range of TAC tactile studs - Black or white steel
Utilisable en extérieur / Exterior use
Utilisable en intérieur / Interior use

The "TAC" studs enable the creation of tactile surfaces to warn visually impaired or blind people of the presence of a danger or obstacle (stairs, sidewalks, lights...). Their ribbed surfacing allows them to be anti-slip and are easily identifiable by the users' walking stick or feet...
They represent an alternative to truncated domes and are fully compliant with the French standard NF P98-351.

"TAC" studs are tactile studs to be sealed and can be installed without a screw anchor on all substrates (except glass and surfacing).

Excellent integration, both indoors and outdoors.

TAC steel studs are available in white or black finish:
Steel (zinced) white: Economical and versatile steel stud. Good corrosion protection. Bright grey colour.
Steel (zinced) black: The perfect combination with stone and paving stones. Good corrosion protection. Aged black colour / grey patina for a timeless look.

The studs are arranged in staggered rows, according to the standard. For installation, it is recommended to use a drilling template, which reduces the installation time and ensures standard installation. The use of MSP-108 glue is recommended for excellent fixing. Refer to the installation instructions.



Caractéristiques techniques

Diameter: 25 mm

Overall height: 21 mm

Height of the stud once sealed: 5 mm

Rod width: 7.85 mm

Packaging: box of 250 units. One box covers 1m65 (L) x 40 cm (l). 1 m = 150 studs.

Type of installation: Chemical sealing

Models in white zinced steel and black steel:

  • Two-component resin 
  • Slip resistance ≥ 0,58*
  • 400h red rust in the Salt Mist test

*AFPV method

Produits associés :
Associated products: